Construction in Miami Fort Lauderdale Florida is the process of constructing a building or infrastructure. Construction differs from manufacturing in that manufacturing typically involves mass production of similar items without a designated purchaser, while construction typically takes place on location for a known client. Construction as an industry comprises six to nine percent of the gross domestic product of developed countries. Construction starts with planning, design, and financing; and continues until the project is built and ready for use.
Large-scale construction requires collaboration across multiple disciplines. An architect normally manages the job, and a construction manager, design engineer, construction engineer or project manager supervises it. For the successful execution of a project, effective planning is essential. Those involved in the design and execution of the infrastructure in question must consider zoning requirements, the environmental impact of the job, the successful scheduling, budgeting, construction site safety, availability and transportation of building materials, logistics, inconvenience to the public caused by construction delays and bidding, etc. The largest construction projects in Miami Fort Lauderdale Florida are referred to as megaprojects.
Meanwhile, Demolition in Miami Fort Lauderdale Florida means the tearing-down of buildings and other structures. Demolition contrasts with deconstruction, which involves taking a building apart while carefully preserving valuable elements for re-use.
For small buildings, such as houses, that are only two or three stories high, demolition is a rather simple process. The building is pulled down either manually or mechanically using large hydraulic equipment: elevated work platforms, cranes, excavators or bulldozers. Larger buildings may require the use of a wrecking ball, a heavy weight on a cable that is swung by a crane into the side of the buildings. Wrecking balls are especially effective against masonry but are less easily controlled and often less efficient than other methods. Newer methods may use rotational hydraulic shears and silenced rock-breakers attached to excavators to cut or break through wood, steel, and concrete. The use of shears is especially common when flame cutting would be dangerous.
Recycling and reuse of materials have long been associated with wise construction practices in Miami Fort Lauderdale Florida. Communities and experienced contractors in Miami Fort Lauderdale Florida are now reaping the environmental and possible economic advantages of Construction Waste Management practices that include the reuse and recycling of Construction and Demolition debris. The County encourages the responsible separation and recycling of construction and demolition debris to support the county’s sustainability goals and to help save on costly disposal fees.
It is important to know what is acceptable and not acceptable for Construction and Demolition (C&D) recycling. It is also important to know the definitions designated by Miami Fort Lauderdale Florida to define certain materials and how they are handled and in what type of facility they can be handled. For example, did you know that garbage (food waste and wrappers, fast food bags, beverage containers, etc.) cannot go into construction and demolition debris containers destined for either recycling or disposal?
For items not listed above, contact the Landfill to confirm disposal options and requirements.
Construction and demolition activities can generate a wide range of different waste materials. This waste is not just rubbish and unwanted material, but also includes:
The advice on this page covers all wastes that may be generated as part of construction and demolition activities, including ‘building and demolition waste’ as defined in the Protection of the Environment Operations Act 1997.
Waste must be transported to a lawful place
Section 143 of the Protection of the Environment Operations Act 1997 requires waste to be transported to a place that can lawfully accept it.
Both the owner of the waste and the transporter are legally responsible for proving the waste was transported to a lawful place.
The owner of the waste and the transporter are each guilty of an offence when waste is transported to a place that cannot lawfully be used as a waste facility. The owner of the waste and the transporter can be ordered to clean up and pay for such waste to be taken to a lawful place.
Relying on advice from others, such as consultants, contractors or managers of demolition waste facilities, is no defence for transporting waste to a place that cannot lawfully be used as a waste facility.
Owners of waste can protect themselves from fines and hefty penalties if they can show they did not transport the waste and can prove that:
You can recycle most common Construction and Demolition debris including concrete, porcelain, rigid plastics, tile, lumber, metals, masonry, plastic, rock, carpet, insulation and more. They are always working on ways to recover new materials, so ask your local construction specialist for more info.
No. When you work with Waste Management, the recycling process does not hinder job site performance. Their sustainable solutions can actually help contractors meet their environmental goals while preserving their economic ones.
In the single-stream recycling process, materials are collected all together with no sorting required by individual recyclers, making it faster and easier for your company to recycle on-site.
First, the materials are offloaded onto the tipping floor of a materials recovery facility (MRF), and the larger recyclables are sorted by hand on a conveyor belt. Next, the smaller materials pass through screening machines. Finally, the recyclables are transferred to their appropriate recycling facilities. Any non-recyclable materials are transferred for proper waste disposal.
Cutting through the massive, mixed clutter of Construction and Demolition (C&D) waste requires ingenuity that’s always mindful of the bottom line. Efficient recovery of these materials could mean the difference between red and black ink. Whether you’re looking for a simple manual sort line or highly automated sorting, the companies in Miami Fort Lauderdale have a solution for you.
Miami Beach • Miami Gardens Aventura • Bal Harbour • Bay Harbor Islands • Biscayne Park • Carol City • Coral Gables • Cutler Bay • Cutler Ridge • Doral • El Portal • Fisher Island • Florida City • Golden Beach • Hialeah • Hialeah Gardens • Homestead • Indian Creek • Islandia • Kendall • Key Biscayne • Medley • Miami • Miami Lakes • Miami Shores • Miami Springs • Naranja • North Bay Village • North Miami • North Miami Beach • Ojus • Opa-Locka • Palmetto Bay • Perrine • Pinecrest • Pinecrest / Monroe Co. • South Miami • Sunny Isles • Surfside • Sweetwater • Universal Park • Virginia Gardens • West Miami