Dismantling is seen as a partial demolition, the removal of a component of a structure often with a replacement by a new part.
The dismantling of an old building typically in the area of Miami Fort Lauderdale Florida involves reversing the construction process. Dismantling is regularly performed in the demolition process but is more often performed where old, period buildings are concerned in the area of Miami Fort Lauderdale Florida.
Dismantling, rather than demolishing, enables valuable assets like period fixtures and fittings, pine and oak beams and even staircases and bricks to be salvaged. This reclamation process allows you thereafter to either reuse the original features in a new project, or the company can purchase them from you, bringing down the cost of your demolition work.
At the end of a building’s life in Miami Fort Lauderdale Florida, it can either be demolished or it can be dismantled and the elements and materials reused and recycled. The most environmentally beneficial use of waste is to reuse it, reuse being associated with higher reductions of embodied energy and emissions to air and water compared to recycling.
When a company works with the method of building dismantling in Miami Fort Lauderdale Florida, they remove building components piece by piece, rather than damaging building parts by destructive methods.
Companies in Miami Fort Lauderdale Florida Start with the dismantling of interior fittings, doors and linings then remove the roofing, cladding, windows and finally framing and foundations. Multi-storey buildings are typically deconstructed floor by floor, beginning with the roof and upper floor.
Prepare the site and mark out waste storage areas before dismantling begins to make the process smoother and help reduce damage to salvaged materials. Increased space for storage of materials is likely to be needed for deconstruction versus demolition. Building Dismantling Miami Fort Lauderdale Florida
Undertake the soft strip manually, with hand tools to minimize damage caused by large machinery.
During the hard strip, the dismantling of major components in a building of Miami Fort Lauderdale Florida may be done in stages. Large scale removal of building parts such as flooring or roofing may be done initially, with excavators or cranes, followed by more detailed separation of components and contamination by hand (on-site or off-site). Preparation of materials may be required prior to removal, such as soaking timber floors and fittings with water to avoid splitting.
The low reuse and relatively low recycling rates reflect a number of barriers to recycling and reuse including the fact that most building elements are not currently designed for dismantling and the resulting excessive time requirements for dismantling coupled with low disposal costs make dismantling a prohibitively expensive process. Demolition contractors in Miami Fort Lauderdale Florida report that deconstruction can take two to ten times longer than demolition efforts putting deconstruction at a distinct economic disadvantage.
However, economics is not the only barrier to reuse and recycling. Current building codes and certification systems in Miami Fort Lauderdale Florida do not generally deal with reclaimed materials and elements and where the element’s performance is not a crucial issue, aesthetics, and commercial desirability may be instead. Consequently even if a building material or element is capable of being dismantled from a technical and economic point of view, it still may not be reused or even recycled due to the lack of a market for uncertified products or those of lesser aesthetic appeal. Building Dismantling Miami Fort Lauderdale Florida
Building materials need not be used just the once and then discarded at the end of a building’s life. Building materials need not be used just the once and then discarded at the end of a building’s life. Reporting on her recent wide-ranging study, Dr. Paola Sassi examines how to design with one eye on the future.
The study highlighted a number of problem areas, but also showed that there is potential for designing reusable and recyclable structures. The following aspects to consider emerged. Building Dismantling Miami Fort Lauderdale Florida
Building elements are interlinked as one layer of the building structure is supported on another. If the installation method of one element precludes its own reuse and recycling it is likely to also preclude the reuse or recycling of the linked elements. Wall and ceiling finishes are prime examples of this affecting the reusability and recyclability of their substrates. Building Dismantling Miami Fort Lauderdale Florida
While mechanically fixed boarding materials (e.g. timber, plastic) can easily be removed allowing the fixings of the support structure to be accessed and ultimately enabling its dismantling, applied finishes (e.g. plaster, tiling) can make the access to the support structure fixings difficult and in some cases impossible and can also contaminate the substrate material precluding its recycling (e.g. plaster on blockwork).
The composite elements studied often proved easy to reuse, but impossible to recycle, confirming the guidelines produced for designing for recycling that recommends avoiding composite materials. Building Dismantling Miami Fort Lauderdale Florida
Materials; Different materials proved particularly suited to specific reprocessing techniques: metals being easily recycled, concrete most easily down-cycled and timber easily reused.
Prefabricated elements often rated highly in terms of their reuse potential, but some rated quite low in terms of their recycling potential as the ability to be recycled is dependant on the design of the unit itself, which often included composite material that could not be recycled or down-cycled.
Reuse of such products as roof membranes, structural elements or insulation material can be hindered by the lack of certification of the elements’ performance. Provision of information on the building products may partially eradicate the problem, but in certain cases, testing will still be necessary adding to the cost of reusing the products. Recycling building elements circumvent the issue of product certification. Building Dismantling Miami Fort Lauderdale Florida
Aesthetic barriers can hinder the reuse of building elements. This clearly applies to visible elements and perhaps applies more to internal building elements than to external building elements. The ability to reapply a finish to a product to be reused could prove invaluable in terms of reusing such items as toilet cubicles that are dismantled with extreme ease, but are normally not reused due to their second-hand appearance in a building area where a second-hand look is not considered acceptable. In particular, where elements are of standard sizes, such as doors the ability to reapply a finish would make what is an easily reclaimed standard sized item very marketable. Being able to reapply a finish would also address the issue of design fashion, enabling building elements to be upgraded to the current fashion requirements.
The reused potential of building products and elements is affected by the design flexibility afforded by the reclaimed item. Building elements made of small units such as bricks in brick walls or rubber tiles for floor finishes, allow for the units to rearranged to suit different designs. At the opposite end of the spectru m are building elements such as windows or prefabricated wall panels made of different types of units acting together as one, which if reused will dictate what the design will be. This limited flexibility constitutes a substantial barrier to their reuse. Building Dismantling Miami Fort Lauderdale Florida
In Miami Fort Lauderdale Florida or in another part of the world some areas of building design represent a particular challenge in terms of achieving easily reusable and recyclable buildings, while others already provide a good choice of recyclable products. However, there is still a need to refine current designs to accelerate the dismantling process where it is already possible and enable it where it is currently impossible. Building Dismantling Miami Fort Lauderdale Florida
On the technical side, building finishes pose possibly the most serious technical and aesthetic problem, as the existing options that enable dismantling are not those traditionally used that appeal to the general public and the aesthetically acceptable options are often not dismantleable. A commercial building designed for recycling and reuse may be in part visually indistinguishable from a traditional building designed for permanence, but a domestic building designed for recycling and would appear very unusual.
On a psychological level, a change of mindset is required not only in terms of aesthetics but also in terms of adopting and promoting reuse and recycling as a truly economically viable and desirable option, not only by clients but by all the construction industry in Miami Fort Lauderdale Florida.
Finally, it is often the case that building products can be installed in a number of different ways that differently affect the product’s recyclability. It is therefore through careful specification as well as considered building products selection that a dismantleable and reusable or recyclable building solution can be produced. Perhaps a model specification such as those already in use in Miami Fort Lauderdale Florida, but one with the purpose of defining and specifying dismantleable, reusable and recyclable buildings would provide the most effective support for designers wanting to ensure maximum reuse and recycling. Building Dismantling Miami Fort Lauderdale Florida
In addition to the waste disposal solutions, the experts of Miami Fort Lauderdale Florida also offer a range of other construction-related services such as the demolition, renovation or gutting of buildings.
With services ranging from building demolition, to soil remediation, to the disposal of building rubble and mixed construction waste, they are experts, experienced partners for all your construction-related needs. Building Dismantling Miami Fort Lauderdale Florida
Miami Beach • Miami Gardens Aventura • Bal Harbour • Bay Harbor Islands • Biscayne Park • Carol City • Coral Gables • Cutler Bay • Cutler Ridge • Doral • El Portal • Fisher Island • Florida City • Golden Beach • Hialeah • Hialeah Gardens • Homestead • Indian Creek • Islandia • Kendall • Key Biscayne • Medley • Miami • Miami Lakes • Miami Shores • Miami Springs • Naranja • North Bay Village • North Miami • North Miami Beach • Ojus • Opa-Locka • Palmetto Bay • Perrine • Pinecrest • Pinecrest / Monroe Co. • South Miami • Sunny Isles • Surfside • Sweetwater • Universal Park • Virginia Gardens • West Miami